На главную

TWO-POLE EXHAUST HYDRAULIC PRESS

Model P7830A

Img. 1
SPECIFICATION
Nominal effort of the press, ts 100
Effort of reverse motion, ts 40
Pressure of a working liquid, kgs/cm2 
Drive press 200
Means of mechanization 13
The greatest course of the plunger, mm 
With the mechanism of compulsory tap 1500
Without the mechanism of compulsory tap 
At work on a failure without stumps 1300
At an extract with restriction-
The closed height of the press, mm 
With the mechanism of compulsory tap 750
Without the mechanism of compulsory tap 
At work on a failure without stumps 950
At an extract with restriction-
Speed of a course, m / min 
Accelerated 35
working 8-13
The opposite at putting off effort 
20 ts 35
40 ts 21
80 ts-
The greatest course of a pusher, mm 800
The least time of a cycle, sec 11,32
Distance between racks in light, mm 1200
The sizes of the stamp plate, mm 
>From left to right 1070
In front back 1100
The sizes of an aperture in a table, mm 260x700
Overall dimensions of the press, mm 
>From left to right 4920
In front back 3490
Height above a level of a floor 7615
Overall dimensions of the press unit in the plan, mm 
>From left to right 5320
In front back 3490
Weight of the press, kg 55500

Elefant © 2005
Designed by SevenStyles