На главную

MACHINE FOR BENDING PIPES

Model I3534

Img. 1

Img. 2
SPECIFICATION
The biggest size of a bent pipe with a limit of fluidity of a material b t 250 MPa (25 kgs/mm2), mm. 
outer diameter D 250
thickness of a wall16
The least diameter of a bent pipe, mm100
The moment of resistance of bent pipes, cm3, not more —640
Least internal radius of the bending tool, mm 
for pipes with a diameter up to 160 1,50
for pipes with a diameter more than 1602D
The biggest internal radius of the bending tool, mm1300
angle of turn of a bending sector, degrees, not less200
The biggest angle of turn of a bending sector, degrees180
Nominal torque on the shaft of a bending sector, MNm (tsm)0,82 (82)
Frequency of rotation of a bending sector (adjustable), rev/min 0,3—1,0
Distance from an axis of the centre of a bending sector up to a place of fastening of the end of a mounting bar, mm7000
The greatest course of a mobile support (a trough), mm2000
The established capacity, kw56
Height of a bending axis above a level of a floor, mm1375
Dimension of the machine (in view of a course of mobile parts), mm 
length 11 750
Width6000
height 1555
Weight of the machine (with electric and hydroequipment and without the tool), kg30 000

Elefant © 2005
Designed by SevenStyles